Skip to main content
yLinx / Help center

Clear answers.
Connected businesses.

Practical help for your connection, your devices and the systems your business relies on.

Find your next step

What can we help you with?

Start with a topic, or search the questions below. Your service agreement and confirmed order define your package and support terms.

01 / Help topics

Business internet

Explore this solution
What does dedicated business internet mean?

Dedicated internet is sold with a specified committed capacity rather than simply a residential headline speed. yLinx describes its business service as 1:1 CIR. Check your quotation for the committed upload and download rates, handover point, service availability and SLA measurement method. See business internet options.

Link to this answer
How much bandwidth does our business need?

List simultaneous video meetings, voice calls, cloud applications, backups and guest devices. Include upload demand and busy periods, then allow room for growth. User count alone is not a reliable sizing method. Share this workload with yLinx for a site-specific proposal.

Link to this answer
How should I test a business internet connection?

Use one computer connected by Ethernet to your normal network handover or router. Pause other large transfers, check the adapter link rate, and test more than one nearby server. Record download, upload, latency, test time and whether a VPN was active. Compare against the contracted service; a Wi-Fi test also measures your wireless network.

Link to this answer
Why do downloads show MB/s when my plan uses Mbps?

Mbps measures megabits per second; MB/s measures megabytes per second. There are eight bits in a byte, so divide Mbps by eight for a theoretical MB/s figure before network overhead. A 100 Mbps connection is therefore roughly 12.5 MB/s in ideal conditions, with actual transfers affected by the server and connection.

Link to this answer
Why is upload speed important for an office?

Uploads carry outgoing video, cloud backups, shared files and data sent to hosted systems. A saturated upload can make meetings and browsing feel slow even when downloads appear healthy. Check both directions and schedule large backups outside busy periods. Confirm the upload rate in your chosen service.

Link to this answer
What do latency, jitter and packet loss mean?

Latency is network delay, jitter is variation in that delay, and packet loss is data that does not reach its destination. Calls can sound broken even with adequate bandwidth when these measures are poor. Collect results over time and include the affected application and destination when reporting a fault.

Link to this answer
Why is a speed test fast while an application is slow?

A test measures one path to one server. A business application may use a different route, server or protocol. Check whether the problem affects one application or all traffic, compare wired and wireless devices, and record timestamps. Application load, DNS resolution, routing and local security software can all matter.

Link to this answer
Can a VPN reduce internet speed?

A VPN adds an encrypted path through another endpoint. Its route, server load and device capacity can affect performance. If your organization permits, compare the same task with and without the VPN, keeping the device and connection unchanged. Do not disable required corporate security controls; share the comparison with your IT team.

Link to this answer
Do we need a static public IP address?

A stable public address can help with site-to-site VPNs, allowlists and approved inbound services. It does not itself increase bandwidth or secure a server. Check the required number of addresses, routing, availability and charges in your yLinx quotation. Read the CGNAT explanation before setting up remote access.

Link to this answer
How can we confirm coverage at our exact address?

Send yLinx the full site address, location pin, building access details and required capacity. A city or area listing is a starting point; feasibility and installation arrangements need confirmation for the actual premises. Start with Lahore coverage information or contact the team.

Link to this answer
What information is needed before installation?

Prepare a site contact, access permissions, equipment location, power availability and internal cabling requirements. Ask which work is included, which hardware is supplied, and whether a site survey is needed. The delivery schedule, one-time charges and installation scope should be confirmed in writing.

Link to this answer
How do we request a bandwidth upgrade or move office?

Provide your account details, current site, new requirements and desired date. For a move, include the new address and access arrangements. Ask yLinx to confirm feasibility, revised commercial terms, hardware changes and any planned downtime before scheduling the change.

Link to this answer
Where can we confirm support response times and SLA terms?

Use the service agreement and the published SLA as the reference, and clarify any differences before ordering. Ask how uptime is measured, which exclusions apply, how incidents are reported and what remedies are available. This FAQ does not set a new response-time or restoration guarantee.

Link to this answer
Does yLinx offer temporary speed boosts or unlimited downloads?

Do not assume another provider’s add-ons apply to yLinx. Ask the team whether a temporary capacity change is available for your service and obtain its duration, charges and traffic terms in writing. Your order and acceptable use terms govern usage; this page does not introduce a new package.

Link to this answer
Back to topics ↑
02 / Help topics

Wi-Fi & everyday troubleshooting

Explore this solution
How do I tell a Wi-Fi problem from an internet fault?

Compare the same task on Ethernet and on Wi-Fi near the router. If Ethernet works normally, investigate wireless coverage or interference first. If both fail, check power and the upstream connection. Note which devices and applications are affected before making changes.

Link to this answer
Where should the Wi-Fi router or access point go?

Use an open, elevated position near the area where devices are used. Dense walls, metal cabinets and enclosed corners can weaken radio coverage. For a large office, plan multiple access points and suitable cabling instead of expecting one router to cover every room.

Link to this answer
Should I connect to 2.4 GHz or 5 GHz Wi-Fi?

2.4 GHz generally reaches farther but often faces more interference. 5 GHz can provide higher throughput nearby, depending on the device and surroundings. Try both bands in the working area. A network name containing “5G” can refer to 5 GHz Wi-Fi; it is not evidence of a cellular 5G connection.

Link to this answer
Why do two devices get different Wi-Fi speeds?

Devices may use different Wi-Fi generations, bands, antenna designs or power-saving settings. Distance and background traffic also differ. Test both in the same location against the same server before comparing them. The router’s advertised radio rate is not a guaranteed internet download rate.

Link to this answer
Why might Wi-Fi stop around 30–40 Mbps on a faster plan?

There is no universal 40 Mbps Wi-Fi limit. A congested band, older adapter, weak signal or device capability can create that result. Compare with Ethernet and try a supported 5 GHz connection nearby. If the wired test is also limited, investigate the WAN link and equipment.

Link to this answer
Why does my wired connection stay below 100 Mbps?

Check the negotiated Ethernet rate on the computer, router and intervening switches. A 100 Mbps port or a cable fault can bottleneck a faster service. Test with a known-good Cat 5e or Cat 6 cable and compatible gigabit ports. Actual useful throughput is lower than the physical link rate.

Link to this answer
Why does performance drop when more devices connect?

Devices share the internet connection and wireless airtime. Background updates, backups and poor-signal clients can reduce the capacity left for interactive work. Review traffic, schedule heavy transfers and size the Wi-Fi network for concurrent use. A device connected but idle usually consumes much less than an active download.

Link to this answer
Should we use mesh, repeaters or wired access points?

Wired access points offer a predictable backhaul when cabling is practical. Mesh can extend coverage, but its performance depends on placement and how nodes connect. A repeater can improve reach while reducing usable capacity. Choose after assessing walls, floors, cabling and the number of active devices.

Link to this answer
How can we provide guest Wi-Fi safely?

Use a separate guest network or VLAN supported by your equipment, with appropriate isolation from business systems. Set a suitable password, bandwidth limits and access rules. Verify guests cannot reach internal devices that should remain private; creating a second network name alone does not prove isolation.

Link to this answer
How should we change and protect our Wi-Fi password?

An authorized administrator should use the router manufacturer’s management interface to set a long, unique password and supported WPA2-AES or WPA3 security. Reconnect trusted devices afterward. Keep the router administrator password separate, and avoid sharing either through public messages.

Link to this answer
How can we remove unknown devices from Wi-Fi?

Review the connected-device list with your IT team; randomized device addresses can make familiar phones look new. Change the Wi-Fi password if access is unauthorized, disable unnecessary WPS and review guest access. Blocking one device address alone is not a durable access-control strategy.

Link to this answer
Can we limit browsing or set access schedules?

Some routers and security platforms support schedules, content categories and device-level rules. Availability varies by model, software and service scope. For an office, agree the policy with the responsible administrator and test it on a limited group. Filtering is useful but does not replace endpoint security or supervision.

Link to this answer
What should we check after a power outage?

Check that the ONT, router, switches and access points all have power. Allow them to complete startup, then inspect the status lights. If safe and permitted, perform one orderly restart. Avoid repeated resets. A local UPS only powers connected equipment and cannot guarantee the upstream network stays available.

Link to this answer
What information helps investigate slow speeds at busy times?

Collect wired tests at both affected and unaffected times, noting server, upload, download and active workloads. Compare more than one destination. Internal backups or wireless congestion can resemble a provider issue. Send the evidence to yLinx so the team can investigate the relevant path.

Link to this answer
How can we investigate buffering or poor video calls?

Try a wired connection, pause competing transfers and check the application’s own diagnostics. Record whether the issue affects one service or several. For calls, latency variation and packet loss matter as well as bandwidth. Share the time, destination and test results with your IT or support team.

Link to this answer
Should I change DNS or disable IPv6 to fix slow browsing?

Avoid applying forum workarounds across an office without diagnosis. DNS changes can affect internal names and security filtering; IPv6 changes can alter application connectivity. Record the failing websites and compare using an approved test device. Ask your administrator to identify and correct the cause.

Link to this answer
Back to topics ↑
03 / Help topics

ONT, router & remote access

Explore this solution
What is the difference between an ONT and a router?

An optical network terminal (ONT) terminates a compatible fiber service. A router connects networks and usually handles local addressing, firewalling and Wi-Fi. One enclosure may combine these roles. Replacing a Wi-Fi router does not automatically replace the provider’s fiber termination.

Link to this answer
What does a red LOS light on an ONT mean?

On many ONTs, LOS indicates loss of the optical signal; the exact light pattern depends on the model. Check the device manual and report the light status to support. Do not look into fiber connectors or sharply bend the cable. An optical fault generally needs diagnosis of the fiber path, not a Wi-Fi password change.

Link to this answer
What if there are no lights on the ONT or router?

Check the wall outlet, power switch and securely seated power lead. Use only the correctly rated power supply. If the unit or adapter smells burnt, is damaged or becomes unusually hot, disconnect it safely and seek support. Do not open the enclosure or substitute an incompatible adapter.

Link to this answer
What should we do if network equipment becomes unusually hot?

Keep ventilation openings clear and the device away from sunlight or other heat sources. Do not stack equipment in an enclosed cabinet without ventilation. If overheating, resets or a burning smell continue, stop using the affected unit and contact support for inspection. Heat alone does not establish which component has failed.

Link to this answer
Is restarting the same as a factory reset?

No. Restarting normally preserves settings; a factory reset can erase the provider configuration, Wi-Fi names and administrator settings. Use a normal restart for initial troubleshooting when appropriate. Do not press the recessed reset button on managed equipment unless support specifically instructs you.

Link to this answer
How do we sign in to the router administration page?

An authorized administrator can check the device label, manual or the computer’s default-gateway address, then use the approved local management interface. Management access may be restricted on provider-managed devices. Ask support for the correct access process rather than assuming a universal address or password.

Link to this answer
What is the default ONT or router username and password?

There is no safe universal credential for every device. Use your equipment documentation or the credentials provided through an authorized channel. Change default administrator credentials where you control the device. Never send passwords in a support screenshot or publish them in a ticket.

Link to this answer
Can we use our own router or firewall?

Ask yLinx to confirm the service handover, interface speed, addressing, VLAN or authentication requirements and support boundary first. Compatibility depends on the connection design. An Ethernet router does not generally replace a provisioned fiber ONT. Have your IT team plan the change and a rollback.

Link to this answer
What are bridge mode and double NAT?

Double NAT occurs when two devices in sequence both translate private addresses. It can complicate inbound access and some applications. Bridge or access-point modes can remove a routing layer, but may disable other functions. Ask your network administrator and provider to choose the supported arrangement before changing managed equipment.

Link to this answer
Why might port forwarding fail behind CGNAT?

Carrier-grade NAT shares a public IPv4 address upstream of your router. A local forwarding rule alone cannot control that upstream translation. Ask whether an appropriate public address or approved remote-access design is available for your service. Do not assume yLinx uses CGNAT on every connection.

Link to this answer
How should remote access and port forwarding be planned?

Prefer an approved VPN or other authenticated access design where practical. If forwarding is required, document the exact service, restrict source access where possible, patch the destination and review firewall rules. Do not expose a router administration page, ERP database or remote desktop directly just to make it reachable.

Link to this answer
Will replacing an older router solve disconnects?

Replacement helps when the router is the diagnosed bottleneck or failure point. It will not repair damaged fiber, an upstream outage or an overloaded application. Check wired tests, logs, power and firmware support first. Age alone is not a guaranteed replacement interval or proof of failure.

Link to this answer
How should we maintain router firmware?

Identify the exact model and hardware revision, use the manufacturer’s trusted update source and follow its procedure. Back up configuration where supported and schedule a maintenance window. For provider-managed equipment, ask yLinx before upgrading. Unsupported hardware may need a planned replacement rather than an unofficial firmware image.

Link to this answer
How can we investigate repeated disconnects?

Record outage start and end times, affected devices, status lights and whether Ethernet fails too. Authorized administrators can review uptime and event logs where available. Preserve logs before restarting if practical. Share useful evidence with support, redacting passwords and other sensitive information.

Link to this answer
Back to topics ↑
04 / Help topics

Cloud infrastructure

Explore this solution
How is a cloud virtual server different from web hosting?

Web hosting packages focus on running websites within a managed account. A virtual server provides an operating-system environment with allocated compute, memory and storage, giving more control and more administration responsibilities. Compare web hosting with yLinx vCloud against the workload.

Link to this answer
How do we size a virtual server?

Measure CPU, RAM, storage, database growth and peak concurrent demand. Include disk performance, network traffic and software licensing requirements. A small pilot and workload measurements are more useful than selecting by vCPU count alone. Confirm the proposed resources with yLinx before moving production.

Link to this answer
What is a sensible cloud migration process?

Inventory applications and dependencies, take a recoverable backup, build a test environment and validate access and performance. Plan data synchronization, a cutover window and rollback criteria. Agree who handles each step with yLinx. Test business functions before changing production traffic.

Link to this answer
Are snapshots the same as a complete backup strategy?

No. Snapshots can help return a virtual machine to an earlier state, but may share failure risks with its storage platform. Define backup location, retention, encryption and restoration tests separately. Confirm what your selected yLinx plan includes and which application data you must protect yourself.

Link to this answer
What should we ask about recovery objectives?

Recovery point objective (RPO) describes how much recent data loss is acceptable. Recovery time objective (RTO) describes the desired time to restore operation. Set targets for each important application and test them. Do not infer either objective from a backup frequency or an uptime percentage alone.

Link to this answer
Who manages operating systems and application updates?

Management scope must be agreed in the order: infrastructure, guest operating system, databases and applications are different responsibilities. Ask who patches, monitors, backs up and responds to incidents. Confirm administrator access and the support boundary before placing a production workload on the server.

Link to this answer
Can server resources be increased without interruption?

Scaling depends on the platform, guest operating system and resource being changed. Some changes require a restart or maintenance window. Ask yLinx to confirm availability, procedure and price for your chosen configuration. Keep a current backup and plan for application checks afterward.

Link to this answer
Where will our cloud data be hosted?

Request the location, contractual data handling terms and any relevant residency requirements directly from yLinx. Include backup locations and administrator access in the discussion. This FAQ does not assert a specific data center location, accreditation or compliance status for your workload.

Link to this answer
Back to topics ↑
05 / Help topics

Web hosting & domains

Explore this solution
Should we choose shared hosting or a virtual server?

Shared hosting is often simpler for standard websites that fit the package limits. A virtual server can suit custom software, privileged access or workloads needing a dedicated operating-system environment. Consider administration, resource use and recovery needs. Read the hosting comparison.

Link to this answer
Are a domain name, hosting and SSL the same thing?

A domain is the name visitors use, hosting runs the website, and an SSL/TLS certificate helps authenticate the site and encrypt HTTPS traffic. They can be supplied separately. Confirm domain ownership, renewal responsibility and certificate arrangements in your order.

Link to this answer
What should we prepare before migrating a website?

Back up files, databases and relevant mail data. Check application and PHP requirements, map DNS records and test the destination before cutover. Keep the old service available until the new site and email are verified. Ask yLinx which migration tasks are included for your account.

Link to this answer
Can a website move interrupt business email?

Yes, if DNS or mail records are changed incorrectly. Record MX, SPF, DKIM and DMARC settings and identify the actual mail provider before editing nameservers. Website and mail hosting can stay separate. Test sending and receiving after the planned change.

Link to this answer
Why does a browser show an HTTPS certificate warning?

Possible causes include expiry, a hostname mismatch, an incomplete chain or an incorrect device clock. Check the exact error and certificate details. Do not ask visitors to bypass the warning. A certificate fixes transport identity and encryption; it does not prove every page or plugin is secure.

Link to this answer
How do we make sure a website backup can be restored?

Keep copies of both site files and databases, plus configuration needed to rebuild the site. Store an independent copy and test a restoration. In cPanel, full-account restoration may require the hosting provider. Confirm retention, restore scope and charges rather than assuming every backup is immediately self-service.

Link to this answer
Why might a hosted website load slowly?

Large images, inefficient database queries, uncached pages, third-party scripts and resource limits can all contribute. Measure server response and page assets separately. Optimize the application and compare against the hosting allocation before upgrading. A faster internet plan at the office does not fix a slow origin server.

Link to this answer
What does unlimited hosting bandwidth mean in practice?

Read the selected package terms and acceptable use policy. “Unlimited” traffic wording does not imply unlimited CPU, memory, disk performance or permission for every workload. Ask yLinx to confirm relevant resource limits, backup arrangements and upgrade options for your website.

Link to this answer
Back to topics ↑
06 / Help topics

SmartSense & call centers

Explore this solution
What should we assess before choosing a call-center platform?

Map inbound and outbound workflows, concurrent agents, call volumes, reporting and integration needs. Include supervisors, remote staff and escalation paths. Use a SmartSense demonstration to validate those scenarios and confirm the agreed feature scope.

Link to this answer
How much connectivity does a voice team need?

Voice capacity depends on concurrent calls, codec and packet overhead, alongside CRM and other traffic. Latency, jitter and loss matter too. Ask your voice provider and IT team to size the full workload, then test peak concurrency on the intended connection.

Link to this answer
What should we check when calls sound broken or delayed?

Test an agent on Ethernet with a known-good headset, check local CPU load and compare different destinations. Review packet loss and latency variation during the affected calls. Record time, direction and call identifiers without exposing private customer content. Escalate with those details.

Link to this answer
Can SmartSense connect to our CRM or business systems?

Integration depends on the actual systems, supported interfaces, permissions and agreed development scope. Provide the CRM name, version and required workflow. Ask yLinx to demonstrate the specific integration and confirm setup, ongoing ownership and any licensing charges before purchase.

Link to this answer
How should call recording and retention be specified?

Agree whether recording is enabled, who can access it, retention duration, storage capacity and export or deletion procedures. Review applicable consent and privacy requirements with your organization’s adviser. This FAQ does not promise a recording period or provide a legal basis for recording calls.

Link to this answer
What should we plan for remote call-center agents?

Provide controlled access, suitable headsets, stable connectivity and a quiet workspace. Agree endpoint security, authentication and which data may be stored locally. Test a real shift workflow before rollout. Ask yLinx to confirm supported deployment and remote-access arrangements for the proposed platform.

Link to this answer
How can a call center prepare for outages?

Plan internet and power resilience, recovery contacts and a tested routing or operational fallback. Decide how customer queues, recordings and reports will be recovered. Failover can interrupt active sessions, so test it with the actual platform rather than relying only on a second connection being present.

Link to this answer
Back to topics ↑
07 / Help topics

ERP & implementation

Explore this solution
How should we choose the first ERP modules?

Start with the business processes causing the largest errors or delays. Map owners, approvals, data and reporting before choosing modules. Finance, purchasing and inventory often interact, so plan dependencies. Ask for a demonstration using your workflows rather than a generic feature checklist.

Link to this answer
Can we move existing spreadsheets or legacy ERP data?

Migration needs a mapping of fields, duplicate cleanup and agreed opening balances. Test a small import, reconcile totals and retain source backups. Confirm which formats and historical records the proposed system supports. The migration scope and responsibility should be written into the implementation plan.

Link to this answer
How long will ERP implementation take?

The schedule depends on process complexity, modules, integrations, data quality and user availability. A realistic plan includes discovery, configuration, migration, testing and training. Ask yLinx for milestones after the scope is assessed; this page does not set a fixed implementation duration.

Link to this answer
Should our ERP run on premises or in the cloud?

Compare connectivity, internal administration, access needs, recovery objectives and total cost. On-premises systems need suitable local infrastructure; cloud deployments need a reliable access and security design. Check the options described on the ERP page with your project team.

Link to this answer
How should ERP access permissions be assigned?

Give users the permissions needed for their role, separate sensitive approvals and review access when staff move or leave. Include audit trails and administrative accounts in the design. Test permissions with real business scenarios before launch. Confirm which controls your selected ERP supports.

Link to this answer
What should user testing and training cover?

Have process owners test purchases, sales, returns, stock movements and period-end reports using representative data. Record issues and acceptance criteria before go-live. Train users for their own roles and prepare a support contact and rollback plan for the transition.

Link to this answer
What should an ERP proposal include?

Request the module and user scope, licensing model, configuration, integrations, data migration, training, hosting and support responsibilities. Separate one-time work from recurring fees and identify change-request rules. A tailored quote should reflect the agreed workflow and deployment rather than an assumed universal package.

Link to this answer
Back to topics ↑
08 / Help topics

Cybersecurity & support

Explore this solution
What should a business security assessment cover?

Define authorized systems and the assessment method first. Review exposed services, identity controls, patching, backup recovery and network boundaries. Agree handling of findings and sensitive data. Ask yLinx to confirm the deliverables and remediation scope for the proposed security service.

Link to this answer
Is a firewall enough to protect a business?

A firewall controls network traffic but cannot replace endpoint protection, updates, strong authentication or tested backups. Layer controls around people, devices and data. Review rules and administrative access regularly. The right design depends on the applications and risks in your environment.

Link to this answer
Why should administrators use multi-factor authentication?

Multi-factor authentication adds a check beyond a password and can reduce the risk from stolen credentials. Use it on administrative, remote-access and other sensitive accounts where supported. Plan protected recovery methods and review access promptly when staff leave.

Link to this answer
Does DDoS protection prevent every kind of attack?

No. DDoS controls focus on service-disruption traffic and have defined coverage and limits. They do not automatically stop phishing, stolen passwords or every application exploit. Confirm protected addresses, detection and escalation arrangements, limitations and exclusions in the actual service agreement.

Link to this answer
What should we ask about monitoring and incident response?

Clarify which systems are monitored, what alerts trigger action, coverage hours, escalation contacts and who can authorize containment. Monitoring and hands-on incident response are different scopes. Agree evidence retention and reporting before an incident; do not infer a response guarantee from a feature name.

Link to this answer
How can backups help with ransomware recovery?

Keep recoverable copies protected from routine administrator mistakes and compromised production accounts. Include an isolated or immutable copy where appropriate, and test restoration. Document application dependencies and recovery order. A successful backup job alone does not prove the business can resume operation.

Link to this answer
What details should we include in a support request?

Provide your company and account reference, site, affected service, start time, impact and steps already tried. Include relevant error text and wired test results if available. Use yLinx contact details. Redact credentials, private customer data and unnecessary sensitive information from screenshots.

Link to this answer
What should staff do when they suspect a security incident?

Follow your organization’s incident procedure and notify the authorized IT or security contact promptly. Preserve useful timestamps and evidence; avoid deleting logs or experimenting on affected systems. Let the response lead decide containment and recovery. For service-related assistance, contact yLinx with the agreed incident details.

Link to this answer
Back to topics ↑

Need help with your service?

Include your account reference, site, affected service and the time the problem started. Never share administrator passwords or private customer records in screenshots.

Get in touch with yLinx ↗

General guidance checked against Google Wi-Fi support, TP-Link troubleshooting, cPanel documentation and Cloudflare network quality guidance. Reviewed 22 October 2026. Device settings vary by model; contact your administrator before changing managed equipment.